Model Preparation and Analysis in Femap w/ NX Nastran

Model Preparation and Analysis in Femap w/ NX Nastran

What is in this webinar?

This webinar shows a live demonstration of applying loads and constraints to a meshed finite element model (FEM) in Femap, and running a Normal Modes and Static Analyses in the NX Nastran solver.

      

    • Related Articles

    • Inertia Relief in Femap w/ NX NASTRAN

      Inertia Relief balances out the applied loads with equal and opposite accelerations, creating a state of static equilibrium and eliminating the need for constraints. Nick covers the topic of Inertial Relief in Femap w/ NX Nastran, including: What is ...
    • Dynamic Response in Femap w/ NX Nastran

      What is in this webinar? This webinar will cover the following topics: FEMAP Dynamics Add-on Overview Frequency Response Demo Random Response Demo NASTRAN Details and Licensing Advanced Support Services
    • Simcenter Femap w/ Nastran Multi-step Non-Linear Webinar

      What is in this webinar? Siemens Principle Applications Engineer Chip Fricke will be presenting this webinar on Simcenter Nastran Solutions 401 & 402. Some of the topics covered will be: Overview of Simcenter Nastran Multi-step Nonlinear Solutions ...
    • Buckling Analysis using Femap w/ Nastran Advanced Nonlinear

      What is in this webinar? In this webinar, Alex Skavdahl will explore post-buckled behavior by running a model far in excess of when it buckles. The advanced non-linear solver can track the post-buckled behavior well into the plastic range. It’s ...
    • Introduction to Femap w/ Nastran Design Optimization SOL 200

      What is in this webinar? This webinar will cover the following topics: Thickness optimization of a stiffened rectangular plate Optimization model setup in Femap Post-process optimization results Quick comparison to HyperSizer results Thickness ...